Leave Your Message
01

Product Display

PORTABLE TRACKLESS WELDING CARRIAGEPORTABLE TRACKLESS WELDING CARRIAGE-product
01

PORTABLE TRACKLESS WELDING CARRIAGE

2024-11-19
  • Ideal for automatic horizontal fillet, lap and butt welding operations
  • Controls are available to perform continuous and/or stitch weld operations
  • Dual gun holder assembly is available for efficient simultaneous welding
  • Wheels on the standard Moggy can be reversed to allow the moggy to run on standard v-groove track
  • The magnetic moggy has a magnetic base that clings to the vertical member for out of position applications

Automated Trackless Welding Carriage

图片1.jpg图片6.jpg图片3.jpg
The  friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.

It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 3.25-100.50 in/min (8.26-255.27 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic ) to perform a fillet weld.

The Standard welding carriage can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 115 and 230 volt AC 50/60 Hz.

Trackless Magnetic Trackless Welding Travel Carriage

"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"

WHMNext_Action_Shot3__51882.jpg图片7.jpg
This Magnetic is essentially the same as the Standard described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.

view detail
Rail guild welding carriagesRail guild welding carriages-product
02

Rail guild welding carriages

2024-11-17

TAKE YOUR WORK IN ANY DIRECTION

_MG_1941_副本.jpg
 
 

STANDARD EQUIPMENT :

COMPACT COMMAND CENTER

Equipped with advanced, easy-to-use process controls featuring:

Machine Function Dial:
Simplify manipulation of machine functions through a single,
user-friendly control developed by welding professionals for intuitive
and practical operation.

Muiti-Weld Processes:
Features standard and programmable weaving options.

Back Step Function:
Pause the machine automatically to dwell, then execute a precise
reverse movement to complete the crater cap.

Limit Switch Function:
In addition to the standard shutoff capability, the limit switches feature a
unique "move to position" function. This innovative patent-pending function
permits operators to effortlessly position the machine by pushing the limit
switch in the desired direction of movement.

_MG_1926_副本.jpg
 
banner-image
Streamline Your Work Process.

QUICK RELEASE CLUTCH LEVER

Facilitate quick positioning of the machine on the rail by
engaging the easy-to-use clutch lever to release side rollers.

Dual Stability

RACK AND PINION SYSTEM

In addition to the side rollers, the IK-72W Multi-Il employs a rack and pinion system integrated into the rail to provide steady, consistent motion in both horizontal and vertical welds.

banner-image

OPTIONAL EQUIPMENT :

banner-image

Plasma Cutting Kit

This kit comprises a plasma torch clamp and an interface cable. It is designed to seamlessly integrate with air plasma systems equipped with a CPC port, enhancing cutting capabilities.

banner-image

Oxy-Fuel Cutting Kit

Extends the IK-72W Multi-Il's cutting capabilities to handle material up to 10" thick. This kit includes Koike's premium design Series 100 torch tips to assure fast and seamless cutting operations.
For convenient gas control, an optional Snap Valve can be purchased to provide an easy one-touch on/off system.

Attachable Weaving Unit

Plug-and-play weaving unit can be easily integrated without additional cables, enhancing welding capabilities on the go.

banner-image

RAIL OPTIONS :

Our rails incorporate the innovative usage of a hard rubber compound, enabling the ability to curve through 2 or 3 panels while a flexible steel tubing along rail centers prevents uneven cutting. Magnetic footing secures the track to plate, enabling vertical usage of machine.

1D, 60 In (1,500mm) Extendable Rail:

Offers direct, linear movement perfect for simple cutting and welding tasks that require straight lines. It's the ideal solution for tasks that demand consistency and precision in a single dimension.

 
banner-image

3D, 40 In (1,000mm) Extendable Flex Rail:

The 3D rail option is the ultimate tool in flexibility and precision, allowing movement in three dimensions: X, Y, and Z. This rail is the perfect choice for intricate, multidimensional projects where cuts and welds need to be made at different depths or angles.

 
banner-image
view detail
Trackless Fillet Welding CarriageTrackless Fillet Welding Carriage-product
03

Trackless Fillet Welding Carriage

2024-11-16

The Well-Handy Multi Next redefines the industry standard of portable welding automation by merging lightweight design with rugged durability, all while eliminating the need of setting up cumbersome and time-consuming tracks or rails, perfect for fitting into compact spaces. This innovative trackless fillet welding carriage thrives even in the most challenging environments, standing as the premier choice for shipyards, airfields, and pipelines by enabling seamless execution of multiple welding processes, including intricate fillet welds, with the precision and consistency to that of robotic welding.

 

_MG_1920_副本.jpg_MG_1920_副本.jpgWHMNext_Action_Shot2__38971.jpgWHMNext_Action_Shot3__51882.jpg

The Choice Is Yours.

Diverse Selection Of Weld Processes

Pre-loaded parameter selections allow users to choose from
a wide variety of welding processes at the push of a button.

Modes of operation include:
•Fillet
•Butt
•Stitch
•Vertical
•Horizontal
•Overhead
•Corner
•Contour
•Dual-Pass
•Overhang
•Sub-Arc

 

 

Unmatched Precision.

Multi-Position Guide Rollers

Designed to work around obstacles in a fillet plate, rollers can be flipped, dropped or spun into various positions in front of or behind the machine, allowing for movement up to 1” below the base of the machine.

Rollers can also be used as a box and beam guide when placed into the negative position.

Additionally, the rollers are fastened with a single-piece of carbon steel for higher durability and is protected against spatter due to its cooling traits.

 

 _MG_1957_副本.jpgDSC_4094-Enhanced-NR__28570.webp

Complete Control With The Push Of A Button.

Advanced Controls With Limit Switch Functionality

Integrated operator panel allows for accurate and precise parameter
input, allowing each user to acheive the same high-quality results
regardless of experience.

Innovative system control stops the machine at the end of each weld
while doubling as a jog control for effortless positioning with a single
switch press.

_MG_1950_副本.jpgrollers-smaller.png

view detail
PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTINGPIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING-product
02

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

2024-11-26

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

  • PIPE GAS CUTTING MACHINE
  • Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:
  • Motorized Machine with power control box and cords
  • Complete Torch Head Assembly with standard B-fittings & valves
  • Torch Holder Assembly with adjustable straight or beveling angle mount and bars Cutting Tips Qty 3 Acetylene 

QQ浏览器截图20241126145716.jpgQQ浏览器截图20241126145535.jpg

Motorized Magnetic Pipe Cutting Beveling Machine Gas Torch Burner Cutter

Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:

 

 

1

Specifications:

 

  • Motor: 120V, 50-60Hz
  • Forward, Neutral and Reverse directional
  • Automatic Cutting Speed: 1/4"-30" per minute
  • Adhesion: DOUBLE Magnetic Wheel, 110lbs
  • Tube Diameter: 4-1/4" Pipe and above
  • Tube Thickness: up to 2" thick

 

 
2

Cutting precision:

 

  • Deviation: less than 0.5mm for one circle cutting up on up to 17" diameter pipe
  • Absorption affinity of magnetic wheel: more than 50 KGS
  • Due to the absorption affinity of the magnetic wheels, this cutting machine can work with the pipe in any direction.

 

 
3

This is a NEW Pipe Gas Cutting Machine. It will automatically cut a pipe by using its magnetic wheels to adhere to the pipe as it automatically cuts around the diameter of the pipe. It can cut straight or beveled clean edges.

 

1

1

1

 
 
 
 
1

OPTIONAL BAND GUIDE STARTER KIT FOR VERTICAL PIPE

Cutting large or vertical standing pipe? See our separate listing for the optional band guide starter kit. Not included with this machine kit. Sold separately. Search for "bluerock band guide kit"

view detail
Portable handle Gas Cutting MachinePortable handle Gas Cutting Machine-product
03

Portable handle Gas Cutting Machine

2024-11-25

Portable handle Gas Cutting Machine

https://topseller365.com/data/prd/056/999/028346.jpg
110V Torch Track Burner Portable handle Gas Cutting Machine(Contains one track)
 
https://topseller365.com/data/prd/028/346/012.jpg
Product Overview
This is a new portable gas cutting machine. It will automatically cut steel by using a track to run along. There is a track each approximately 5.9' in length. It can cut straight or beveled clean edges. This item will ship in two separate packages (one the machine and the other the track). Welding hose to connect to the machine not included.
Product Parameters
Voltage: AC110V
Automatic Cutting Speed: 1.97"-29.5"/min(50mm-750mm/min)
Thickness of cut steel plate: 0.16"-17.7"(4mm-450mm)[It depends on the type of cutting nozzle]
Cutting Circle Diameter: 7.87"-78.7"(200mm-2000mm)
Cutting torch specifications: Propane:G03#1 *1 +G03#0 *1
Acetylene:G02#1 *1
Track length: 5.9ft(1.8m)
Machine package size: 26.4"*12.2"*11.0"(67cm*31cm*28cm)
Track packing size: 48.03"*19.05"*3.15"(122cm*23cm*8cm)
Machine net weight/gross weight: 29.1LB(13.2kg)/30.0LB(13.6kg)
https://topseller365.com/data/prd/028/346/03.jpg
Product Parameters
Propane Cutting Thickness(unit:mm) Acetylene Cutting Thickness(unit:mm)
G03#00 4-9 G02#00 5-10
G03#0 5-10 G02#0 10-20
G03#1 10-20 G02#1 20-30
G03#2 20-35 G02#2 30-50
G03#3 35-60 G02#3 50-70
G03#4 60-90 G02#4 70-90
G03#5 90-130 G02#5 90-120
G03#6 130-180 G02#6 120-160
G03#7 180-250 G02#7 160-200
G03#8 250-300 G02#8 200-270
G03#9 300-380 G02#9 270-350
G03#10 380-450 G02#10 350-400

Note: Under normal circumstances, the cutting thickness of 5-100mm can meet the normal demand, more than 100mm on the gas pressure requirements will be improved !!!

Product Features & Advantages
https://topseller365.com/data/prd/028/346/018.jpg https://topseller365.com/data/prd/028/346/022.jpg https://topseller365.com/data/prd/028/346/016.jpg
Shifting Unit

The moving device above the bar
can make the cutting head move
around, can accurately adjust the
cutting torch cutting position,
processing accuracy is higher.

Position Gauge

The machine is equipped with a standard positioning gauge, which can be used for circle cutting after installation, and can cut circles with a diameter range of 7.87"-78.7", providing more processing options!

Control Panel

The control panel includes the
function of forward/backward
and speed adjustment, the fuse
is easy to change, and the case
is spraying plastics to prevent
corrosion and clean easily.

https://topseller365.com/data/prd/028/346/017.jpg https://topseller365.com/data/prd/028/346/014.jpg https://topseller365.com/data/prd/028/346/021.jpg
Cutting Head

Cutting torch is made of pure
copper material, high temperature
resistant, with Angle adjustment
scale, can adjust the cutting head
Angle, cutting precision is higher.

Metal Casters

The four casters of the machine
are made of metal, wear-resistant
and high-temperature resistant.
They are perfectly matched with
their own track and move smoothly
without shaking.

Gas Distributor

Gas distributor is made of high-
quality alloy, with good sealing
performance. Intake volume of
the two nozzles can be controlled
precisely through valves and
quick switch.

- Adopt thyristor speed control, Steady speed change,walk smoothly.
- The fuselage adopts high strength alloy aluminum precision die-casting and durable.
- The Angle of the cutting torch can be adjusted freely. High cutting accuracy.
- With straight cut, can cut I, Y, V groove.Double torch can be cut at the same time.
- You can cut steel plates of different thickness by changing the cutting nozzle.Mesh guide is not easy to deform.
https://topseller365.com/data/prd/028/346/025.jpg
Item Included(028346)
CG1-30CB Flame Cutting Machine *1 Track *1(5.9ft) The power cord *1
Acetylene Cutting Torch *1 Propane Cutting Torch *2 English Manual *1
Fork wrench *1 Nozzle cleaner *10  
view detail
Gas Cutting Machine Flame Cutting Machine Flare Track BurnerGas Cutting Machine Flame Cutting Machine Flare Track Burner-product
04

Gas Cutting Machine Flame Cutting Machine Flare Track Burner

2024-11-25

 

https://topseller365.com/data/prd/028/346/013.jpg
Product Overview
This is a new portable gas cutting machine. It will automatically cut steel by using a track to run along. There is a track each approximately 5.9' in length. It can cut straight or beveled clean edges. This item will ship in two separate packages (one the machine and the other the track). Welding hose to connect to the machine not included.

- Adopt thyristor speed control, Steady speed change,walk smoothly.
- The fuselage adopts high strength alloy aluminum precision die-casting and durable.
- The Angle of the cutting torch can be adjusted freely. High cutting accuracy.
- With straight cut, can cut I, Y, V groove.Double torch can be cut at the same time.
- You can cut steel plates of different thickness by changing the cutting nozzle.Mesh guide is not easy to deform.

Product Parameters
Voltage: AC110V
Automatic Cutting Speed: 1.97"-29.5"/min(50mm-750mm/min)
Thickness of cut steel plate: 0.16"-17.7"(4mm-450mm)[It depends on the type of cutting nozzle]
Cutting Circle Diameter: 7.87"-78.7"(200mm-2000mm)
Cutting torch specifications: Propane:G03#1 *1 +G03#0 *1
Acetylene:G02#1 *1
Track length: 5.9ft(1.8m)
Machine package size: 26.4"*12.2"*11.0"(67cm*31cm*28cm)
Track packing size: 48.03"*19.05"*3.15"(122cm*23cm*8cm)
Machine net weight/gross weight: 29.1LB(13.2kg)/30.0LB(13.6kg)
Product Parameters
Propane Cutting Thickness(unit:mm) Acetylene Cutting Thickness(unit:mm)
G03#00 4-9 G02#00 5-10
G03#0 5-10 G02#0 10-20
G03#1 10-20 G02#1 20-30
G03#2 20-35 G02#2 30-50
G03#3 35-60 G02#3 50-70
G03#4 60-90 G02#4 70-90
G03#5 90-130 G02#5 90-120
G03#6 130-180 G02#6 120-160
G03#7 180-250 G02#7 160-200
G03#8 250-300 G02#8 200-270
G03#9 300-380 G02#9 270-350
G03#10 380-450 G02#10 350-400
Note:Under normal circumstances, the cutting thickness of 5-100mm can meet the normal demand, more than 100mm on the gas pressure requirements will be improved !!!
Product Features & Advantages
https://topseller365.com/data/prd/028/346/018.jpg

Shifting Unit

The moving device above the bar
can make the cutting head move
around, can accurately adjust the
cutting torch cutting position,
processing accuracy is higher.

Position Gauge

The machine is equipped with a standard positioning gauge, which can be used for circle cutting after installation, and can cut circles with a diameter range of 7.87"-78.7", providing more processing options!

https://topseller365.com/data/prd/028/346/022.jpg
https://topseller365.com/data/prd/028/346/016.jpg

Control Panel

The control panel includes the
function of forward/backward
and speed adjustment, the fuse
is easy to change, and the case
is spraying plastics to prevent
corrosion and clean easily.

Cutting Head

Cutting torch is made of pure
copper material, high temperature
resistant, with Angle adjustment
scale, can adjust the cutting head
Angle, cutting precision is higher.

 

https://topseller365.com/data/prd/028/346/017.jpg
https://topseller365.com/data/prd/028/346/014.jpg

Metal Casters

The four casters of the machine
are made of metal, wear-resistant
and high-temperature resistant.
They are perfectly matched with
their own track and move smoothly
without shaking.

Gas Distributor

Gas distributor is made of high-
quality alloy, with good sealing
performance. Intake volume of
the two nozzles can be controlled
precisely through valves and
quick switch.

 

https://topseller365.com/data/prd/028/346/021.jpg
Product Presentation & Details
https://topseller365.com/data/prd/028/346/03.jpg
 
https://topseller365.com/data/prd/028/346/02.jpg https://topseller365.com/data/prd/028/346/010.jpg
https://topseller365.com/data/prd/028/346/07.jpg https://topseller365.com/data/prd/028/346/08.jpg
 
https://topseller365.com/data/prd/028/346/025.jpg
Item Included
CG1-30CB Flame Cutting Machine *1 Track *1(5.9ft) The power cord *1
Acetylene Cutting Torch *1 Propane Cutting Torch *2 English Manual *1
Fork wrench *1 Nozzle cleaner *10  

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

view detail
Rotary Weld PositionerRotary Weld Positioner-product
01

Rotary Weld Positioner

2024-11-30
TUQI

110V Rotary Welding Positioner 15W DC Welding Positioning Turntable Table

This rotary welding positioner turntable table is crafted from tough cast iron, ensuring long-lasting and reliable performance. Its compact design makes it ideal for installation on various countertops. The turnover mechanism with a self-locking function is both safe and stable, making it easy to use and practical in all situations. It runs smoothly, making it a high-efficiency option for welding work.

Package Included: 1*Rotary Welding Positioner Turntable Table; 1*Foot Switch; 1*Power Cord; 2*Clamping Handles; 1*English Manual

Rotary Welding Positioner Turntable Table

1

1

1

 

  • The equipped three-jaw welding chuck can prevent the welding parts from moving and falling, making the work more accurate.
  • Moreover, the special anti-electromagnetic interference design effectively reduces the high-frequency interference during TIG welding, which can effectively improve the welding quality.

 

 

  • This welding rotary table allows for infinite adjustments of the rotating speed from 2-10rpm through the control knob, making it easy for you to adjust the speed according to different welding processes.
  • This rotary welding positioner is driven by a 15W high-quality DC motor for smooth and stable operation. With a load capacity of up to 11.02 lbs (vertical) or 22.05 lbs (horizontal)

 

 

  • This rotary welding positioner turntable table has a table flip angle of 0-90º, which can be fixed at any angle by the knob on the machine to meet a wide range of welding needs.
  • The reserved holes on its base allow you to securely fasten it to most countertops, and the 6.64ft long footswitch plug cord makes it easier to control the machine remotely.

 

 
This rotary welding positioner turntable table
1

Specification

Rotary Motor Power 15W
Working Table Speed 2-10 r/min
Horizontal Loading Capacity 10kg/22.05lbs
Vertical Loading Capacity 5kg/11.02lbs
Working Table Tilting Angle 0-90°
Working Table Diameter 180mm/7.09inch
Foot Switch Cord Length 202.5cm/6.64ft
Power Cord Length 183cm/5.9ft
Net Weight 8.55kg/18.85lbs
Gross Weight 9.25kg/20.39lbs
Product Size 32*27*28cm/12.6*10.63*11.02inch
Package Size 35*30.5*34.5cm/ 13.78*12*13.58inch

Product guides and documents

view detail
Weld PositionerWeld Positioner-product
02

Weld Positioner

2024-11-30
 
 

Description

This rotary welding positioner turntable table is crafted from tough cast iron, ensuring long-lasting and reliable performance. Its compact design makes it ideal for installation on various countertops. The turnover mechanism with a self-locking function is both safe and stable, making it easy to use and practical in all situations. It runs smoothly, making it a high-efficiency option for welding work.

61OHLvSYKOL._AC_SL1000_.jpg61CykYP35fL._AC_SL1100_.jpg61-vhAvF53L._AC_SL1000_.jpg61nTgkqlXKL._AC_SL1000_.jpg61Kp8evNJsL._AC_SL1000_.jpg

Details

Power Indicator Light: It can indicate that the machine has been powered on and is working, bringing you more convenience during operation.

Power Cord: The 5.9ft long power cord has sufficient length to facilitate your movement to the desired work position. It can also keep you away from the power supply, making it safer to use.

Large Screws: High-quality large screws can firmly fix the machine and improve the overall stability of the machine.

 

Application

It can be fixed on the working table or specific tooling for clamping workpiece with manual welding, and can also be used with a welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing, and other processes. It is especially suited for welding flanges, tubes, rounds and other parts up to 22.05 lbs.

 

Specification

Color: Blue

Model: BY-10

Martial: Cast Iron

Process: Spraying Molding

Plug: US Standard

Input Voltage: AC 110V

Rated Welding Current: 80A

Workbench Rollover: Manual

Rotary Motor Voltage: DC 24V 15W  

Rotary Motor Power: 15W

Working Table Speed: 2-10 r/min

Max Speed: 10rpm

Horizontal Loading Capacity: 10kg/22.05lbs

Vertical Loading Capacity: 5kg/11.02lbs

Working Table Tilting Angle: 0-90°

Working Table Diameter: 180mm/7.09inch

Foot Switch Cord Length: 202.5cm/6.64ft

Power Cord Length: 183cm/5.9ft

Product Size: 32*27*28cm/12.6*10.63*11.02inch

Package Size: 35*30.5*34.5cm/ 13.78*12*13.58inch

Net Weight: 8.55kg/18.85lbs

Gross Weight: 9.25kg/20.39lbs

61-vhAvF53L._AC_SL1000_.jpg61nTgkqlXKL._AC_SL1000_.jpg611iiD-GcgL._AC_SL1000_.jpg

Package Included

1*Rotary Welding Positioner Turntable Table

1*Foot Switch

1*Power Cord

2*Clamping Handles

1*English Manual

 

view detail
Welding Positioner 0-90° Positioning Turntable TableWelding Positioner 0-90° Positioning Turntable Table-product
03

Welding Positioner 0-90° Positioning Turntable Table

2024-11-29

Rotary Welding Positioner Turntable Table, Welding Positioner,  Welding Positioner 10kg(Horizontal)/5kg(Vertical) Rotary Table

QQ浏览器截图20241129141714.jpgQQ浏览器截图20241129141634.jpgQQ浏览器截图20241129141723.jpgQQ浏览器截图20241129141738.jpg

Description

Our welding positioner is made of high-quality steel through blackening and spray molding processes, which is sturdy and durable. It is equipped with a 3-jaw chuck with a diameter of 2.56in to hold the welding element securely for your convenience. In addition, the low-speed operation and 0-90° tilt angle make it easy for you to weld more difficult components. It is also equipped with a foot pedal that controls the start and stop of the machine, so you can concentrate on welding with ease. It is a great assistant to help you finish your welding.

 

Key Features

Build to Last: It is made of high-quality steel through the blackening and spray molding processes, which has strong resistance to high temperatures and can ensure a long service life.

 

Precise Positioning: It is equipped with a 2.56in three-jaw chuck with a clamping range of 0.08-2.28in and a support range of 0.87-1.97in, which effectively prevents movement and dropping of weldments, thus significantly improving welding accuracy.

 

High Stability: It features a 20W DC drive motor that runs at low speeds with 1-12 rpm stepless speed regulation for stable operation. In addition, it has a load capacity of up to 11.02lbs (vertical) or 22.05lbs (horizontal) and forward and reverse functions, providing excellent stability to support efficient and precise welding.

 

Thoughtful Design: It can be tilted from 0-90° and securely fastened at the desired angle with butterfly bolts. The clear operator's station makes it easy to adjust the speed, connect the power supply, and more. 2 chuck keys make adjusting the tightness of the chuck jaws a breeze.

 

Safety Guard: The product is equipped with conductive carbon brushes that can effectively avoid the risk of electrical leakage, so you can use it with peace of mind.

 

Welding Assistant: With it, you have a more professional workbench for welding work. It can be fixed on the workbench or specific tooling for manual welding or paired with welding equipment for automatic welding.

 

Easy to Install: The simple structure, complete accessories, and detailed English manual allow you to complete the installation and start using it in a short time.

 

Easy to Clean: Thanks to its smooth surface and simple structure, you can wipe the dirt from this machine with a rag(not included).

 

Ideal Gift: With its good performance and high practicability, it would be an ideal gift for your family, friends, and others who enjoy welding

 

Protective Package: To prevent damage to the product due to bumps in transit, we place sponges to protect the product as much as possible.

 

Details

Foot Pedal: It controls the starting and stopping of the machine.

 

Emergency Stop Switch: It can be used in emergencies to suspend the machine's operation for your subsequent repairs.

 

Power Indicator: It will light up when the product is plugged in and in working condition.

 

Stable Base: The square base and holes in the bottom stabilize the product nicely. In addition, the hole in the bottom can also be used to place a gun holder for holding the torch (not included).

 

Long Power Cord: The 4.92ft long power cord reduces usage limitations.

 

Application

It is mainly used for rotating and turning round and annular workpieces, so that the workpiece weld is placed in the optimum position for welding, such as horizontal, boat-shaped, etc. It can also be used to fix chucks or specific tools on the table to clamp the workpiece for manual welding, and can also be used to fix the workpiece on the table for cutting, grinding, assembling, testing, etc. It is especially suited for welding flanges, tubes, rounds and other parts up to 22.05 lbs.

QQ浏览器截图20241129141723.jpgQQ浏览器截图20241129141804.jpgQQ浏览器截图20241129141834.jpgQQ浏览器截图20241129141657.jpgQQ浏览器截图20241129141815.jpg

Specifications

Color: Blue

Style: Modern

Material: Steel

Process: Blackening, Spray Molding

Mount Type: Countertop

Motor Type: DC Drive Motor

Assembly Required: Yes

Power Source: Corded Electric

Plug: US Standard

Flip Method: Manual Flip

Input Voltage: AC 110V

Motor Voltage: DC 24V

Speed: 1-12rpm Stepless Speed Control

Power: 20W

Horizontal Load-bearing: 10kg/22.05lbs

Vertical Load-bearing: 5kg/11.02lbs

Tilt Angle: 0-90°

Three-jaw Chuck Diameter: 65mm/2.56in

Clamping Range: 2-58mm/0.08-2.28in

Support Range: 22-50mm/0.87-1.97in

Power Cord Length: 1.5m/4.92ft

Gross Weight: 11kg/24.25lbs

Product Size: 32*27*23cm/12.6*10.6*9.1in

Countertop Diameter: 20.5cm/8.07in

Package Size: 36*34*31cm/14.2*13.4*12.2in

 

Package Included

1*Welding Positioner

1*Foot Pedal

1*Power Cord

1*English Manual

2*Chuck Keys

view detail
Rotary Welding PositionerRotary Welding Positioner-product
04

Rotary Welding Positioner

2024-11-29

Master Welding Projects with Precision and Ease

56db7378-2f6a-4a7b-9730-20f072db065e.__CR0,0,1464,600_PT0_SX1464_V1___.jpg

POPWELD rotary welding positioner turntable is the perfect companion for achieving flawless welding. It makes welding easy and precise, with 0-90° tiltable worktable, 1 to 12rpm stepless speed control, and K01-63 three-jaw chuck. Choose VEVOR's positioner makes welding effortless and accurate.

welding positioner positioning turntable

Constructed with high-strength carbon steel, our welding positioner turntable table boasts exceptional 11 lbs (vertical) or 22 lbs (horizontal) load-bearing capacities. Robust and durable structure can handle various welding tasks while offering corrosion resistance for long-term use.

welding positioner turntable table

Our positioner turntable machine features a worm gear turning structure with a self-locking function, ensuring precise and stable positioning of the welding workpiece. The butterfly bolt can securely fix the worktable at 0-90° desired angle for added convenience.

portable welder positioner turntable machine

Control the worktable's 360° rotation effortlessly with the foot pedal switch, providing flexibility during welding. The control knob allows for stepless speed adjustment (1-12rpm), catering to the requirements of different welding tasks and ensuring a smooth welding process.

positioner turntable machine,welder turntable table

Our welding positioner is suitable for a variety of welding tasks, ideal for welding small workpieces, such as small metal structure welding, small pipe welding, parts fabrication welding, as well as art and manual welding, greatly enhancing welding accuracy and efficiency.

2e2e2a9f-8c2d-432a-a27f-2775f9d06604.__CR0,0,1464,600_PT0_SX1464_V1___.jpg
view detail

CertificateCERTIFICATE

certificates-1
certificates-2
certificates-3
certificates-4
certificates-5
certificates-1
certificates-2
certificates-3
certificates-4
certificates-5
certificates-1
certificates-2
certificates-3
certificates-4
certificates-5
010203040506070809101112131415
about

About Us

Since 2008, we have been a proud supplier of products and services for the welding, cutting, automation and industrial finishing needs of the different market segments in China. with advanced cutting machines, welding positioning equipment, portable cutting/welding machines, and gas equipment. We serve steel service centers, heavy equipment, general fabrication, energy, shipbuilding, pipe & vessel, transportation, education, construction, tank fabrication, repair and maintenance, and other industries.
Read more
  • 16
    years innovation for everyone, consumers oriented.
  • 1000000
    +
    of products offered
  • 17
    of patents and certificates
  • 18
    +
    of R& D qualified workers
  • 30
    mil ft 2
    more than 30 thousands m² plants 
  • 50
    more than 50 countries clients served 

Industry application

Why choose us

The best Welding, Cutting, Industrial Finishing and Automation Services in CHINA

Cooperation Cases

TO KNOW MORE ABOUT popweld, PLEASE CONTACT US!

  • popweld@yeah.net
  • Headquarters; No,2 Pinyi jinhua Road, Linyi city, Shandong province, China.

Our experts will solve them in no time.

news