Leave Your Message

Welding Carriage

PORTABLE TRACKLESS WELDING CARRIAGEPORTABLE TRACKLESS WELDING CARRIAGE
01

PORTABLE TRACKLESS WELDING CARRIAGE

2024-11-19
  • Ideal for automatic horizontal fillet, lap and butt welding operations
  • Controls are available to perform continuous and/or stitch weld operations
  • Dual gun holder assembly is available for efficient simultaneous welding
  • Wheels on the standard Moggy can be reversed to allow the moggy to run on standard v-groove track
  • The magnetic moggy has a magnetic base that clings to the vertical member for out of position applications

Automated Trackless Welding Carriage

图片1.jpg图片6.jpg图片3.jpg
The  friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.

It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 3.25-100.50 in/min (8.26-255.27 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic ) to perform a fillet weld.

The Standard welding carriage can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 115 and 230 volt AC 50/60 Hz.

Trackless Magnetic Trackless Welding Travel Carriage

"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"

WHMNext_Action_Shot3__51882.jpg图片7.jpg
This Magnetic is essentially the same as the Standard described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.

view detail
Rail guild welding carriagesRail guild welding carriages
01

Rail guild welding carriages

2024-11-17

TAKE YOUR WORK IN ANY DIRECTION

_MG_1941_副本.jpg
 
 

STANDARD EQUIPMENT :

COMPACT COMMAND CENTER

Equipped with advanced, easy-to-use process controls featuring:

Machine Function Dial:
Simplify manipulation of machine functions through a single,
user-friendly control developed by welding professionals for intuitive
and practical operation.

Muiti-Weld Processes:
Features standard and programmable weaving options.

Back Step Function:
Pause the machine automatically to dwell, then execute a precise
reverse movement to complete the crater cap.

Limit Switch Function:
In addition to the standard shutoff capability, the limit switches feature a
unique "move to position" function. This innovative patent-pending function
permits operators to effortlessly position the machine by pushing the limit
switch in the desired direction of movement.

_MG_1926_副本.jpg
 
banner-image
Streamline Your Work Process.

QUICK RELEASE CLUTCH LEVER

Facilitate quick positioning of the machine on the rail by
engaging the easy-to-use clutch lever to release side rollers.

Dual Stability

RACK AND PINION SYSTEM

In addition to the side rollers, the IK-72W Multi-Il employs a rack and pinion system integrated into the rail to provide steady, consistent motion in both horizontal and vertical welds.

banner-image

OPTIONAL EQUIPMENT :

banner-image

Plasma Cutting Kit

This kit comprises a plasma torch clamp and an interface cable. It is designed to seamlessly integrate with air plasma systems equipped with a CPC port, enhancing cutting capabilities.

banner-image

Oxy-Fuel Cutting Kit

Extends the IK-72W Multi-Il's cutting capabilities to handle material up to 10" thick. This kit includes Koike's premium design Series 100 torch tips to assure fast and seamless cutting operations.
For convenient gas control, an optional Snap Valve can be purchased to provide an easy one-touch on/off system.

Attachable Weaving Unit

Plug-and-play weaving unit can be easily integrated without additional cables, enhancing welding capabilities on the go.

banner-image

RAIL OPTIONS :

Our rails incorporate the innovative usage of a hard rubber compound, enabling the ability to curve through 2 or 3 panels while a flexible steel tubing along rail centers prevents uneven cutting. Magnetic footing secures the track to plate, enabling vertical usage of machine.

1D, 60 In (1,500mm) Extendable Rail:

Offers direct, linear movement perfect for simple cutting and welding tasks that require straight lines. It's the ideal solution for tasks that demand consistency and precision in a single dimension.

 
banner-image
banner-image

2D, 40 In (1,000mm) Extendable Flex Rail:

Our 2D rail option enables non-linear movement along both the X and Y-axes, allowing for more complex patterns and shapes, extending your capabilities beyond simple straight lines.

3D, 40 In (1,000mm) Extendable Flex Rail:

The 3D rail option is the ultimate tool in flexibility and precision, allowing movement in three dimensions: X, Y, and Z. This rail is the perfect choice for intricate, multidimensional projects where cuts and welds need to be made at different depths or angles.

 
banner-image
view detail
Trackless Fillet Welding CarriageTrackless Fillet Welding Carriage
01

Trackless Fillet Welding Carriage

2024-11-16

The Well-Handy Multi Next redefines the industry standard of portable welding automation by merging lightweight design with rugged durability, all while eliminating the need of setting up cumbersome and time-consuming tracks or rails, perfect for fitting into compact spaces. This innovative trackless fillet welding carriage thrives even in the most challenging environments, standing as the premier choice for shipyards, airfields, and pipelines by enabling seamless execution of multiple welding processes, including intricate fillet welds, with the precision and consistency to that of robotic welding.

 

_MG_1920_副本.jpg_MG_1920_副本.jpgWHMNext_Action_Shot2__38971.jpgWHMNext_Action_Shot3__51882.jpg

The Choice Is Yours.

Diverse Selection Of Weld Processes

Pre-loaded parameter selections allow users to choose from
a wide variety of welding processes at the push of a button.

Modes of operation include:
•Fillet
•Butt
•Stitch
•Vertical
•Horizontal
•Overhead
•Corner
•Contour
•Dual-Pass
•Overhang
•Sub-Arc

 

 

Unmatched Precision.

Multi-Position Guide Rollers

Designed to work around obstacles in a fillet plate, rollers can be flipped, dropped or spun into various positions in front of or behind the machine, allowing for movement up to 1” below the base of the machine.

Rollers can also be used as a box and beam guide when placed into the negative position.

Additionally, the rollers are fastened with a single-piece of carbon steel for higher durability and is protected against spatter due to its cooling traits.

 

 _MG_1957_副本.jpgDSC_4094-Enhanced-NR__28570.webp

Complete Control With The Push Of A Button.

Advanced Controls With Limit Switch Functionality

Integrated operator panel allows for accurate and precise parameter
input, allowing each user to acheive the same high-quality results
regardless of experience.

Innovative system control stops the machine at the end of each weld
while doubling as a jog control for effortless positioning with a single
switch press.

_MG_1950_副本.jpgrollers-smaller.png

view detail
welding carriage/cartwelding carriage/cart
01

welding carriage/cart

2024-11-15

Innovation in the field of welding: Welding Carriage

图片3.jpg图片4.jpg图片1.jpg


Imagine in welding operations, no longer worry about the protection of the control panel, no need to worry about the adjustment of the welding torch angle and the direction of movement of the welder. The Welding Carriage comes into being to bring you unprecedented convenience and efficiency. The Welding Carriage consists of four main parts: a vertical body, a horizontal body, a welding machine, and a control panel. The vertical body includes a lower support member and an upper support member, and the upper support member can move up and down through a vertical length adjustment unit. The horizontal body is composed of a first and a second side bracket, the first side bracket is connected to one side of the upper bracket to achieve rotation, and the second side bracket moves left and right through a horizontal length adjustment unit. A pair of torches are respectively connected to the angle adjustment unit, and the control panel is located within the radius around the vertical body, connected to one side of the lower bracket and can be rotated horizontally to avoid interference with the welding machine.

view detail
Welding CarriageWelding Carriage
01

Welding Carriage

2024-11-14

Popweld Welding Carriage: The Ultimate Solution for Efficient Welding

_MG_1950_副本.jpg_MG_1948_副本.jpg

Are you tired of struggling with inefficient and unreliable welding equipment? Look no further than the Popweld Brand Welding Carriage! Designed to make your welding tasks easier and more precise, this innovative carriage will revolutionize the way you work.

Features:

  • Precision Control: The Popweld welding carriage offers precise control over your welds, ensuring consistent and high-quality results every time.
  • Durability: Built with robust materials, this carriage is designed to withstand the rigors of heavy-duty welding applications.
  • User-Friendly: Intuitive operation and easy adjustments make the Popweld welding carriage a breeze to use, even for novice welders.
  • Versatility: Compatible with a wide range of welding processes, this carriage is perfect for a variety of industrial and professional applications.
  • Portability: Compact and lightweight design allows for easy transportation and storage.

图片3.jpg图片4.jpg

Benefits:

  • Increase Productivity: With its advanced features, the Popweld welding carriage can significantly increase your welding speed and productivity.
  • Improve Quality: Achieve flawless welds with precise control and consistent performance.
  • Reduce Costs: By improving efficiency and reducing rework, you can save time and money in the long run.

图片7.jpg图片8.jpg图片6.jpg图片9.jpg

Invest in the Popweld Brand Welding Carriage today and experience the difference for yourself! Order now and take your welding to the next level.

view detail
Welding Carriage/carWelding Carriage/car
01

Welding Carriage/car

2024-11-14

Popweld Brand Welding Carriages: The Perfect Solution for Efficient and Precise Welding 

Popweld  welding carriages are the ultimate choice for professionals seeking efficient and precise welding solutions. These advanced machines are designed to meet the demands of modern welding applications, offering exceptional performance, reliability, and versatility.

_MG_1920_副本.jpg_MG_1926_副本.jpg_MG_1923_副本.jpg

Popweld welding carriages are built with robust and durable materials, ensuring they can withstand the rigors of industrial environments. They feature precise drive systems that provide smooth and consistent movement, ensuring high-quality welds every time. Whether you are working on long seams or intricate curves, Popweld carriages offer the accuracy and control you need to get the job done right.

_MG_1935_副本.jpg_MG_1938_副本.jpg_MG_1941_副本.jpg

One of the key advantages of Popweld brand welding carriages is their versatility. These machines are compatible with a wide range of welding processes, including MIG, TIG, and flux-cored arc welding. They can be easily configured to suit various welding applications, making them ideal for a diverse range of industries, from manufacturing and construction to automotive and aerospace.

图片1.jpg图片2.jpg

Popweld welding carriages are also equipped with user-friendly controls and interfaces, allowing operators to easily adjust welding parameters and monitor performance in real-time. This not only enhances productivity but also ensures consistent weld quality. Additionally, the carriages are designed for easy maintenance, minimizing downtime and ensuring maximum uptime.

Safety is a top priority with Popweld brand welding carriages. They are equipped with various safety features, such as emergency stop buttons and overload protection, to ensure the safety of operators and prevent equipment damage. These machines also meet international safety standards, providing peace of mind to users.

图片8.jpg图片7.jpg

In conclusion, Popweld brand welding carriages are a valuable asset to any welding operation. With their exceptional performance, versatility, and user-friendly design, these machines can help improve productivity, weld quality, and overall safety. Invest in a Popweld welding carriage today and experience the difference for yourself.

view detail
Welding CarriagesWelding Carriages
01

Welding Carriages

2024-11-14

Popweld Brand Welding Carriages: The Perfect Solution for Efficient and Precise Welding 

Popweld  welding carriages are the ultimate choice for professionals seeking efficient and precise welding solutions. These advanced machines are designed to meet the demands of modern welding applications, offering exceptional performance, reliability, and versatility.

_MG_1920_副本.jpg_MG_1926_副本.jpg_MG_1923_副本.jpg

Popweld welding carriages are built with robust and durable materials, ensuring they can withstand the rigors of industrial environments. They feature precise drive systems that provide smooth and consistent movement, ensuring high-quality welds every time. Whether you are working on long seams or intricate curves, Popweld carriages offer the accuracy and control you need to get the job done right.

_MG_1935_副本.jpg_MG_1938_副本.jpg_MG_1941_副本.jpg

One of the key advantages of Popweld brand welding carriages is their versatility. These machines are compatible with a wide range of welding processes, including MIG, TIG, and flux-cored arc welding. They can be easily configured to suit various welding applications, making them ideal for a diverse range of industries, from manufacturing and construction to automotive and aerospace.

图片1.jpg图片2.jpg

Popweld welding carriages are also equipped with user-friendly controls and interfaces, allowing operators to easily adjust welding parameters and monitor performance in real-time. This not only enhances productivity but also ensures consistent weld quality. Additionally, the carriages are designed for easy maintenance, minimizing downtime and ensuring maximum uptime.

Safety is a top priority with Popweld brand welding carriages. They are equipped with various safety features, such as emergency stop buttons and overload protection, to ensure the safety of operators and prevent equipment damage. These machines also meet international safety standards, providing peace of mind to users.

图片8.jpg图片7.jpg

In conclusion, Popweld brand welding carriages are a valuable asset to any welding operation. With their exceptional performance, versatility, and user-friendly design, these machines can help improve productivity, weld quality, and overall safety. Invest in a Popweld welding carriage today and experience the difference for yourself.

view detail
POPWELD Welding Carriage/cartPOPWELD Welding Carriage/cart
01

POPWELD Welding Carriage/cart

2024-10-31

Welding Automation Carriages & Tractors
Improve uniformity and quality of cutting and welding processes.
Cut inconsistencies and weld defects on long weld seams or large diameter workpieces with a welding automation carriage.

Implementing welding or cutting automation for some applications not only increases operator safety, but production rate and the quality of results.

 

Optimise your welding and cutting process with our range of auto welding tractors and carriages below! 

view detail