Welding Positioner Turntable Table

Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding

Product Description

Application

It can be fixed on the working table or specific tooling for clamping work piece with manual welding, and can also be used with a welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing, and other processes. It is especially suited for welding flanges, tubes, rounds and other parts up to 22.05 lbs.

Packages

1x Rotary Welding Positioner Turntable Table
1x foot pedai
1x mini chuck
1x power line
Note:The speed can be adjusted with the white knob

Wide Application

For working table or specific tooling for clamping workpiece with manual welding,welding operation machine to achieve automatic welding, and for cutting, grinding, assembly, testing and other processes.

Rotary Welding Positioner Turntable Table

Specifications

Material: Cast Iron

Workbench Rollover: Manual

Working Table Speed: 2-10 r/min

Max Speed: 10rpm

Working Table Tilting Angle: 0-90°

Working Table Diameter: 180 mm /7.09 Inch

Foot Switch Cord Length: 202.5 CM/6.64 FT

Horizontal loading capacity: 10 KG / 22.05 lbs

Vertical loading capacity ：5 KG /11.02 lbs

Input Voltage: AC 110V 60HZ

Rated Welding Current: 80A

Rotary Motor Voltage: DC 24V

Rotary Motor Power: 15W

Power Cord Length: 183cm/5.9ft

Product Size: 32*27*28cm/12.6*10.63*11.02inch

Package Size: 35*30.5*34.5cm/ 13.78*12*13.58inch

Net Weight: 8.55kg/18.85lbs

Gross Weight: 9.25kg/20.39lbs

Three-Jaw Welding Chuck

Three claws are reinforced to prevent the weldment pieces from moving and falling.It is upgraded to be more accurate and more practical.

Anti-Slip Foot Switch

Using foot switch to control table rotation, the speed is regulated by the knob on the machine(2-20r/min stepless speed regulation).

1) The wire terminal icon of welder or cutter machine negative electrode (or anode) MARK: cable terminal(-)

REMARK: Here the connection cable specifications and requirements, see the requirements configured welder or cutter.

2) The ground terminal of the control circuit and the control box, MARK:

REMARK:The posts beside this mark, be sure to use 4mm wire to connect the earth , to avoid damage.

When using the product, if you encounter any problems, please -(Arriage) in time, our technical team will provide you with help and solutions within 24 hours.

product details

Product Description

Welding turning rotation is mainly used to holding and turning the workpiece while welding, it's a king of welding auxilary machine.
This turning roll has a brief and compact structural design, it is small in size ,light weight, can work in any environment.
It suits the cylindric workpieces weighting less than 3000kg/6600 lb and diameter at 70-1900mm, while stepless speed regulation can be achieved within the 1900mm/min, simplicity of operation, can be installed and moved easily.

Key Features

Control Box

Equipped with manual control box,the initiation and termination of roller wheel frame are easily taken under controlled.

Polyurethane Wheel

Polyurethane wheel design increases the friction between wheel and work piece, standing the high temperature, fiction better and do not easy to skid.

Frequency Motor

Frequency control motor, making the load capacity much bigger, low-speed stability much better.

Foot Switch

When more precise welding of the welding workpiece is required, the rotation of the roller can be controlled by the foot switch.

Welding Torch Stand

There is an extra welding torch stand for you. The bracket can be moved up, down, left and right, and the part holding the welding gun can rotate 360 degrees freely.
It can provide a very stable operating environment for cylindrical workpieces.

Arc-shaped Wheel

There are two sets of rotating wheels, which increases the diameter range of the applicable workpiece, the arc-shaped wheel structure can adapt to the diameter of different workpieces without adjustment.
The frame is solid and durable, bearing capacity is below 3000KG/6600 lb.

view detail

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

2018-07-16

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

PIPE GAS CUTTING MACHINE
Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:
Motorized Machine with power control box and cords
Complete Torch Head Assembly with standard B-fittings & valves
Torch Holder Assembly with adjustable straight or beveling angle mount and bars Cutting Tips Qty 3 Acetylene

QQ浏览器截图20241126145716.jpg QQ浏览器截图20241126145535.jpg

Motorized Magnetic Pipe Cutting Beveling Machine Gas Torch Burner Cutter

Complete Motorized Magnetic Torch Pipe Cutting Kit Includes:

Specifications:

Motor: 120V, 50-60Hz
Forward, Neutral and Reverse directional
Automatic Cutting Speed: 1/4"-30" per minute
Adhesion: DOUBLE Magnetic Wheel, 110lbs
Tube Diameter: 4-1/4" Pipe and above
Tube Thickness: up to 2" thick

Cutting precision:

Deviation: less than 0.5mm for one circle cutting up on up to 17" diameter pipe
Absorption affinity of magnetic wheel: more than 50 KGS
Due to the absorption affinity of the magnetic wheels, this cutting machine can work with the pipe in any direction.

This is a NEW Pipe Gas Cutting Machine. It will automatically cut a pipe by using its magnetic wheels to adhere to the pipe as it automatically cuts around the diameter of the pipe. It can cut straight or beveled clean edges.

OPTIONAL BAND GUIDE STARTER KIT FOR VERTICAL PIPE

Cutting large or vertical standing pipe? See our separate listing for the optional band guide starter kit. Not included with this machine kit. Sold separately. Search for "bluerock band guide kit"

view detail

Welding Positioner

2018-07-16

Rotary welding positioners slowly turn a part at a consistent speed to increase productivity, reduce fatigue, and allow welders to create a high-quality weld. The positioner can be set at a variety angles to best suit the work. A foot pedal activates turning to keep hands free for welding

Features:

● Owing to the proprietary collector of flat carbon earth type, the reduction gear is resistive to damage and is durable.

● Each type can be operated easily by a push-button or a foot switch for local operation.

● Because the structural design is standardized, the positioner is readily applicable to revolution and high-speed turning by a D.C. servo motor at option.

● Using a worm reduction gear, the revolution drive unit keeps smooth revolution of even an electric load, and safety is also ensured by a self-locking mechanism.

● Quick response to speed change operation by a dial.

● Non-paralleled rigidity and quality.

PS-1F

PS-2F

PS-3F

PS-4F

view detail

Roller frame for welding and fabrications

2018-07-16

Tank Turning Roll

Specifications of Tank Turning Roll

Input Power: AC 120 volt 60 Hz Single Phase
Maximum load capacity per set of one drive roll and one idler roll: 6,600 lb.
Maximum work-piece diameter: 79 in.
Work-piece diameter range: 7.9 in. to 78.7 in.
Speed Range: 3.5 to 35.4 in./min.
Approximate shipping weight per set: 580 lb.

The Tank Turning Roll with power and idler rolls at the minimum distance.

Above: Tank Turning Roll turning a 16 inch diameter pipe.

Standard Features of Tank Turning Roll

The model Tank Turning Roll features both drive rolls independently powered providing excellent driving
On/off electric foot control with forward and reverse switch at the control box.
Adjustable roll to roll center distance for optimum contact angle.
Each worm gear drive system is oil immersed for long life and sealed from contaminants such as weld spatter and slag.
Hand held push button pendent control with maintained forward, stop, reverse and infinitely variable speed adjustment.
Adjustable roll to roll center distance for optimum contact angle.
Both drive rolls independently powered eliminating the many problems associated with drive shaft systems.
Separate drive roll & idler roll allows for short or long work-pieces.
AC inverter drive with LED frequency display for speed adjustment.
Machined bed on idler and drive roll for greater accuracy.
Low voltage 24 volt D.C. operator controls.

Above: The Tank Turning Roll drive and idler rolls have a heavy duty iron core with extra thick urethane for long life and traction. The rolls will not mar or scratch materials such as stainless steel or aluminum.

RD-3-INW Tank Turning Roll Electrical Box

Above:The Tank Turning Roll Electrical Box.

view detail

Welding Positioner Turntable Timing Function

2018-07-16

Welding Positioner Turntable Timing Function, With 300mm Chuck 220V

Weight capacity - The welding positioner turntable can support up to 30KG of weight, making it suitable for a wide variety of welding applications.
Chuck size - The turntable comes with a 300mm chuck, providing ample space for securing and holding materials in place during the welding process.
Timing function - The turntable features a timing function that allows users to control the speed and duration of the rotation, ensuring precise and consistent welding results.
Easy operation - The positioner is designed with user-friendly controls that are easy to operate, even for novice welders.
Power supply - The turntable runs on 220V power, which is a common voltage for welding equipment, making it easy to integrate into existing welding setups.

41hdXSBjg5L._AC_.jpg 316iq36tiiL._AC_.jpg

Product Description

Parameter:
△ Power Input: AC 220V / 50Hz
△ Capacity (horizontal loading): 30kg
△ Capacity (vertical loading): 15kg
△ Rotary table diameter: 310mm
△ Rotary table height: 380mm
△ Chuck Size: 300mm
△ Rotary speed: 1~15 R/Min
△ Central Hole Diameter: 25mm
△ Angle of inclination: 0~90°
△ Rotary motor: DC 110V 60W
△ N.W: 46kg
QQ浏览器截图20241127135622.jpg QQ浏览器截图20241127135635.jpg 71boguiNNxL._AC_SX679_.jpg
Description:
△ The rotation structure is driven by DC motor, stepless speed regulation can be achieved;
△ The tile range of rotary table is 0~90°, worker can set the shaft, so the welding at arbitrary angle can be achieved.
△ Special design of anti-electromagnetic, which reduce the high frequency interference of TIG’S welding
△ A time-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder.
△ The adjustable-welding gun support can be furnished to fix the position of the welding torch.
△ The welding chuck and air-powered tailstack can be furnished to achieve the function of self holding to the workpiece quality effectively.

view detail

Automated Welding Systems

2018-07-16

11-Gas-Metal-Arc-Welding-modes-available-for-any-material-2.jpg

popwelding was recently tasked with building a pipe welding system to improve throughput, quality and safety. As a global provider of efficient and integrated boiler room solutions for applications of any size, approached with the requirements to build a system that would reduce costs, increase safety, and improve quality in their operations.

By leveraging PC-based automation from in our latest pipe welding system popWelding was able to implement a pipe welding system that exceeded Cleaver-Brooks' requirements and helped to nearly triple the production efficiency.

Other improvements accomplished:

On average, reduced arc time by 63%
Reduced weld clean-up time by 90%
Reduced rework by 10%
Decreased filler metal spend by 39%

Transition from Bolt-On to an Integrated Approach

The universal approach to building welding cells has been lagging behind. As the Principal Automation Engineer at popWelding, use the world of welding equipment can be summarized into two words: Bolt-On

With adding or “bolting-on” more subsystems to the cell, Soon, your welding cell has seven control panels and needs a massive power bar to feed them all. Down the line, this approach becomes complicated as the maintenance for such a design is unsustainable, the technologies advance and the customers using the equipment demand more modular solutions.

At popWelding, it was understood early on that in order to be a key differentiator in the marketplace, the transition to integrated approach was inevitable. VP of Product Development at popWelding. Over the last 17 years, we have expanded rapidly, and now we have hundreds of products as well as many custom, application-specific solutions. We can also tie together multiple pieces of equipment and provide complete turnkey plant design.

view detail

0102

Welding Positioner Turntable Table

Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding

Product Description

Application

Packages

Wide Application

Rotary Welding Positioner Turntable Table

Specifications

Three-Jaw Welding Chuck

Anti-Slip Foot Switch

Welding Tank Turning Rolls

Product Description

Key Features

Control Box

Polyurethane Wheel

Frequency Motor

Foot Switch

Welding Torch Stand

Arc-shaped Wheel

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING

OPTIONAL BAND GUIDE STARTER KIT FOR VERTICAL PIPE

Welding Positioner

PS-1F

PS-2F

PS-3F

PS-4F

Roller frame for welding and fabrications

Tank Turning Roll

Welding Positioner Turntable Timing Function

Welding Positioner Turntable Timing Function, With 300mm Chuck 220V

Product Description

Automated Welding Systems

On average, reduced arc time by 63%

Reduced weld clean-up time by 90%

Reduced rework by 10%

Decreased filler metal spend by 39%

Transition from Bolt-On to an Integrated Approach

Leave Your Message